Interprotect Carboguard 504 Epoxy Primer - 1.5L and 5L Packs

A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.

Features & Benefits

• Excellent primer for water and many aqueous chemicals immersion service when topcoated with an approved finish
• Excellent adhesion to difficult substrates
• Excellent holding primer
• Excellent corrosion resistance
• Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
• Approved for use in NZ Food Processing Plants (see "Approvals NZ/AU" section)
• AS4020 Potable Water Approval (see "Approvals NZ/AU" section)
• Good abrasion resistance
• Very good aged re-coatabilit
• Resists splash and spillage or fumes of a wide range of chemicals
• Easy application by brush, roller or spray
• Ideal tie-coat over inorganic zincs
• Versatile - can be used on most substrates under many different types of topcoat
• Long pot-life
• Excellent maintenance touch-up primer for hand-cleaned substrates
• A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
• Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series – Carboguard 504 Grey is preferred. Refer to Technical Services for further advice

Theoretical CoverageRates:-

10 m²/litre at 50 microns
6.7 m²/litre at 75 microns
Allow for loss in mixing and application.